only environmentally safe ingredients. Many years of research and
extensive weather testing have proven Weather-Bos to be
long-lasting with superior perfomance.
- Natural Oil and Resin
Based, Yet Water Reducible
- water carries the
nutritional solids into the wood much deeper than highly evaporative
flammable carriers. The solids then bond to the wood in the drying
process, and as the water evaporates it does not emit high levels of
toxic fumes in comparison to coatings containing flammable or harsh
solvents. The formulas are low odor and non-flammable, and do not leave
an oily or waxed surface film which attracts dirt that can be tracked
onto other surfaces.
- High Solids
- The natural oils and
resins will penetrate deep or bond to the surface depending on the
desired finish and application procedure. Once these solids have dried
and bonded to the wood cells they become a permanent part of the
substrate. Weather-Bos does not contain primarily evaporative
ingredients nor non-penetrating mineral oils, non-drying mildew-prone
oils or wax.
- Durability via
- Weather-Bos natural
oils and resins penetrate and fill the open wood cells. Upon drying, the
resins adhere to the wood and form an inseparable bond that will not wash
out or evaporate. Weather-Bos provides stability deep within the
wood, creating long term dimensional stabilization as opposed to minimal
- Water Resistant
- Wood cells are saturated
with Weather-Bos formulas which dry, solidify and bond to the
substrate. The "deep" rooted fungi that promote wood decay are
denied water in the structural pores necessary for growth.
Weather-Bos has eliminated the need for poisonous additives
to control wood rot by virtue of water denial instead. Superficial fungi
like moss and mildew often grow on damp dirty surfaces and are easily
prevented by occasional cleaning and maintenance.
- UV Protection
contains; sunscreens, trans-oxides and/or U.V. stabilizers which help
reduce damage due to climatic conditions.
- Average coverage is
50-200 sq. ft. per gal. per application depending upon type of surface
and climatic conditions. On most surfaces to obtain maximum protection a
minimum of three applications is recommended.
Note: Coverage is dependent on proper preparation and
- Easy to apply
- Formulas may be
inter-mixed to acquire desired color or penetration (except Masonry and
Marine Boss). Apply by any agreeable method i.e.; pre-dipping,
roller, spray or brush. Soap and water clean-up.